Equipment
Power Tools
Ventilation fans, saws, hydraulic extrication tools, generators, and chainsaws with specs.
01
Ventilation Fans
Tempest BD 18-H-5.5
Engine: Honda 5.5HP · Fan: 18" blade · CFM: 15,023 cfm @ 3,870 rpm · Weight: 85 lbs · Filter: 2 stage air filter · Cycle: 4 stroke, belt driven · Fuel: Straight gas
Tempest BD 24-H-6.5
Engine: Honda 6.5HP · Fan: 24" blade · CFM: 18,130 cfm @ 3,175 rpm · Weight: 92 lbs · Filter: 2 stage air filter · Cycle: 4 stroke, belt driven · Fuel: Straight gas
BATfan 45
Engine: 600W · Fan: 16.5" blade · CFM: 14,155 cfm · Weight: 62 lbs · Power: Battery powered · Runtime: 45 min @ full speed · Charge: 100% in 10 hours
02
Saws & Cutting
Partner K960 Rescue (Husqvarna)
Engine: 6.5 hp · Blade: 14" diamond blade · Weight: 23.4 lbs · Fuel: 50:1 mix · Drive: Belt driven · Filter: 2 stage (oiled foam plastic & paper)
Partner K650
Engine: 71 cc motor · Blade: 12" abrasive disc or carbide tip · Weight: 19.6 lbs · Fuel: 50:1 mix · Drive: Belt driven · Filter: 2 stage (oil main / backup paper) · Note: Carbide teeth can't be missing 2 in a row or 3 total
Partner K950
Engine: 93.6 cc motor · Blade: 12" or 14" · Cut Depth: 4" with 12" blade, 5" with 14" blade · Weight: 21.8 lbs · Fuel: 50:1 mix · Drive: Belt driven · Filter: 2 stage (oil main / backup paper) · Note: Carbide teeth can't be missing 2 in a row or 3 total
K 970 Ring
Engine: 6.5 hp · Blade: 14" · Cut Depth: 10.6" · Weight: 30.4 lbs · Fuel: 50:1 mix · Note: No arbor nut allows for deeper cut. Heavy Rescue specific.
STIHL TS 800
Engine: 6.7 hp · Blade: 16" · Cut Depth: 5.6" · Weight: 28 lbs · Fuel: 50:1 mix · Note: Heavy Rescue specific.
Stihl Chainsaw (044, 440, 441, MS460, MS 500i)
Engine: 2 stroke / single cylinder · Power: 5 hp (6.7 HP for 500i) · RPM: 2,500 idle (3,000 for 500i), 13,500 max · Bar: 20" · Teeth: 65 drive teeth, 32 cutting teeth · Oiler: Automatic chain oiler · Filter: 3 stage (pre, main, spill) · Oil: 30 wt bar oil · Fuel: 50:1 mix · Safety: Chain brake · Note: Can't be missing 3 in a row or 5 total
Stihl Small Chainsaw (MS200T)
Engine: 2 stroke / single cylinder, 35.2cc · Weight: 7.9 lbs · Bar: 12" · Oiler: Automatic chain oiler
Type III Chainsaw (MS261)
Engine: 2 stroke / single cylinder, 50.2cc · Weight: 10.8 lbs · Bar: 20" · Features: Decompression valve, adjustable automatic oiler
03
Hydraulic / Extrication
Hurst Tool Power Unit
Engine: 4 cycle, 50cc, 2 hp · Hose: Non-conductive nylon or Kevlar twin hoses, kink resistant, quick connect with safety collar · Reservoir: Dump valve must be inline with hose to operate. Maintain fluid level 3/4" - 1 1/2" from rim.
Hurst Spreaders
Spread: 32" · Tips: Replaceable heat treated steel
Hurst Ram
Open Force: 7.5 tons · Pull Force: 3.5 tons
Hurst Cutter
Cutting Force: 12.5 tons at blade center · Opening: 6" wide · Blade Notch Force: 35 tons
Battery Hurst "Combi Tool" (SC357 E2)
Weight: 41 lbs · Spread Distance: 14.5" · Max Spread Force: 225,483 lbs · Cutter Opening: 10.8" · Power: Battery powered internal hydraulics · Note: Cuts and spreads
04
Generators
Honda 3000 Generator
Engine: 196cc, 4 cycle · Oil: 30 wt · Fuel: Straight gas · AC Output: 120V, 3000W max (25 amp), 2600W continuous (21.7 amp) · Outlets: 1x 25A twist lock, 2x three-prong GFCI, 2x 12V DC @ 12 amp / 144W · Load Capacity: 10 Circle D lights / Skill saw and 1 Circle D